SweetPee Refillable Body Belt Basic

SweetPee Refillable Body Belt Basic

SweetPee Body Belt Basic

SweetPee Body Belt Basic

SweetPee Budget Kit

This product is 2oz of high quality synthetic urine with all the same properties of real human urine. It contains proteins, amino acids and creatinine, specific gravity and is PH balanced. Realistic golden color that foams like real urine.

Availability: Out of stock

Congratulations, by purchasing this SweetPee® product, you’ve geared yourself with the best synthetic urine money can buy. Our fake pee has been conceived with all of the same natural properties as standard human urine, things like creatinine, specific gravity and proper PH level, just to name a few; have all been taken into consideration.

Our products are manufactured so that they can be used by men and women alike. Practical jokes just reached a whole new level with the SweetPee Budget Kit urine prank system kit. Realistic golden color that foams like real urine. 

What's included:

  • Over 2 ounces of high quality synthetic urine.

  • Heat activator powder and easy-to-read temperature strip.

Note: This product has 1 year shelf life from date of manufacture. 


DO NOT break safety seal, open flip top, or unscrew cap of any of the bottles UNTIL the day of use. Because our formula is so complete, if the contents are exposed to any air or contaminates it will run the risk of growing harmful bacteria, just as real urine would.

To heat this product, simply add the heat activator powder.

Heat Activator – Note that the use of the heat activator is optional; its sole purpose is to heat the solution to near body temperature. Therefore if you notice that the solution temperature is already within the proper temperature range of 94°F to 100°F (indicated in green) then you may skip heat activator step.

For easy pouring; verify that the heat activator content is in a “loose” or “free flowing” granular form.

If the granules are in a solid or partially solid form, simply tap the vial against a hard surface, this will break down any clumps and bring the heat activator back to its original granular form. The principle behind the heat activator: The lower the temperature of the solution = the more heat activator will be needed. However be very cautious as to the amount used, you must avoid overheating the solution.

IMPORTANT: If or when concealing the Container, never place the Container’s temperature strip next to or against your skin as this may lead to a false temperature reading!

Guidelines to the amount of heat activator needed: If you do not see any temperature indication on the strip, this means the temperature is below 90°F. In this case we recommend that you carefully add 1/3 of the Heat Activator into the mixing container. If the temperature on the strip indicates a solution temperature of 88°F to 92°F then we recommend that you only add 1/4 of the Heat Activator into the Mixing Container.

CAUTION: Adding an excessive amount of Heat Activator may overheat the solution; very rarely one will need to use more than 2/3 of the Heat Activator without overheating the solution!

After pouring the estimated amount of heat activator, replace cap, tighten and gently shake the contents to completely dissolve the Heat Activator, (usually takes less than 20 seconds). After the Heat Activator granules have completely dissolved, read the temperature strip to ensure that the Solution is within the required temperature of 94°F to 100°F (indicated in green).

If necessary, carefully add a little more heat activator powder to the solution and check temperature again.

Important info you should know:

  • If not opened the solution is good until the expiry date indicated on the packaging. Please verify that date to make sure the product is not expired.
  • If you open the product and do not need to use it, you can freeze it for up to 6 months.
  • Use caution: the urine in this device is for external use only! Do not spray anyone in mouth or eyes!
  • This product is intended for a single use cannot be refilled. If you are interested in getting a refillable product in the future you can purchase our SweetPee® Body Belt Deluxe or SweetPee® Refillable Body Belt Basic.
  • Last but not least keep away from children and pets.

Frequently Asked Questions

Can I reheat my synthetic urine?

Yes, if the seal is not broken, you may reheat your synthetic urine as many times as you like.

Can I microwave the bottle?

Yes, you can microwave it for 7 second increments on the day of use, but you will need to remove the lid. Once you remove the lid you will need to use your product within 8 hours.

What If I opened/broke the seal and did not need to use it, can I keep it for a later time?

Yes. Once the solution is opened you have 8 hours to do one of 3 things with it; 1) Use it 2) Put it in the fridge to use in the next 48 hours. 3) Put it in the freezer. (It will keep for up to 6 months)

How do I use the heat activator powder?

  • Take out the heat activator powder and gently tap the vial to loosen the powder.
  • Carefully pour about 1/8 of the powder into the vial's cap, then add it to the urine. Do not pour directly from the vial into the urine! It's very easy to over pour if you do this.
  • Put the cap back on the urine, shake it gently for 10-15 seconds, then check the temperature strip.
  • Repeat as necessary to get the urine to 94 - 100 degrees. Do not add the whole vial to the bottle in one go.
  • If your starting temperature is low you may need to use the complete vial, but still add gradually

**Please be aware** If your temperature strip is not showing a reading, it means your solution is TOO HOT or TOO COLD"

How quickly does the heat activator work?

The heat activator will work almost instantly. We suggest giving it about 5 -10 seconds to fully react before adding more heat activator.

The heat activating powder is not working. What do I do?

You need to determine if the solution is too warm, or too cold. If it is too cold then you should add more heat activator. If it is too warm, then you need to cool the solution down. So long as the activator is still in a powder state it will still be effective. If the activator is in a liquid or solid state it means that the activator has already reacted with moisture in the air and can no longer be used. You should open the heat activator only when you are ready to use it.

My temperature strip is not showing any indication, I think its broken.

It is more likely that your solution is either too hot or too cold. Either way it will not show any indication.

How long will the heat activator hold the temperature?

The heat activator will not hold the temperature, it will only bring your synthetic urine up to temperature. For this reason it is best that the heat activator is used as close to the time you’re ready to prank. In cold temperatures, it may take longer for the urine to reach its ideal temperature. Warm weather = fast heating, Cool weather = longer heating time required. Plan accordingly.

Write Your Own Review
You're reviewing:SweetPee Budget Kit