NO, only a few seconds will burst the bag.
SweetPee Refillable Body Belt Basic
High quality synthetic urine. Ready to go, just heat & piss. All the same properties of natural human urine. Adjustable belt up to 48in waist.
Congratulations, by purchasing this SweetPee® product, you’ve geared yourself with the best synthetic urine money can buy. Our fake pee has been conceived with all of the same natural properties as standard human urine, things like creatinine, specific gravity and proper PH level, just to name a few; have all been taken into consideration.
Our products are manufactured so that they can be used by men and women alike. Practical jokes just reached a whole new level with the SweetPee Refillable Body Belt Basic urine prank system kit.
1 Refillable Bladder bag containing 90 ml/cc (3oz) of highest quality synthetic urine.
1 Velcro-adjustable elastic belt (up to 48in waist).
2 Heat pads.
1 Temperature strip.
1 Refill Syringe
It is in your best interest to read the following information completely and carefully before attempting to use the product!
- DO NOT open the white cap before using the provided synthetic urine solution.
- Close the plastic clips on the tubing and cut the hose to the desired length. This should ONLY be done the day of use. If the hose is cut or the cap is opened and the product is stored it will run the risk of growing harmful bacteria.
- Remove one heat pad from its wrapper then give the pad a few good shakes to activate. Once activated, the heat pad will have a life expectancy of 10 hours. Note that the pad may barely feel warm to the touch and this is perfectly normal.
- Remove the paper backing of the heat pad and stick pad to the urine bag, between the bag and the belt. (Please Note: If you apply the heat pad to the elastic band, it will not heat up the synthetic urine properly.
- Install the belt under your clothing; wear the product so that the tube is pointing towards the floor and that the temperature strip is touching your skin to allow proper heat transfer. The heat pad in combination with your body heat will raise the urine to its ideal temperature within one hour.
- Once the product has been properly installed around your waist, under your clothing and touching your skin, wait until the temperature reads 94°-100°F. We recommend checking the temperature in 20 minutes increments, checking the temperature more frequently will disrupt the heating process and will only delay the required time for the fake urine to reach optimal temperature.
- While the solution is warming up, make sure the white clips are closed properly.
- Once you’ve achieved the proper temperature of 94°-100°F, you are now ready to get down and dirty and play a realistic urine prank on someone.
To let the urine flow, simply open the white clips. Make sure to rinse out the SweetPee® Refillable Basic Belt with water after every use. If the bag gets nasty, you can use a 50/50 mixture of hydrogen peroxide (50%) and water (50%) to clean it. Then rinse with water.
- Using the supplied syringe, measure 90cc/ml of water into a clean disposable cup. Room temperature water is recommended in order to speed-up the heating process. The syringe only holds 60cc/ml at a time, so you will need to split up the measurement.
- Add the entire content of the vial of SweetPee Fake Urine Refill (sold separately) to the cup of water.
- With a clean disposable instrument (plastic utensil works fine) stir the mixture together until powder is completely dissolved.
- Using the syringe, suck up the urine mixture and inject it into the empty pee bag via the refill port.
Important info you should know:
• Never attempt to microwave the device. Only a few seconds will burst the bag.
• The synthetic urine is good until the expiry date indicated on the packaging. Please verify that date to make sure the product is not expired.
• Only use one heat pad at a time.
• In cold temperatures, it may take longer for the urine to reach its ideal temperature. Warm weather = fast heating, Cool weather = longer heating time required. Plan accordingly.
• Use caution; the urine in this device is for external use only! Do not spray anyone in mouth or eyes!
• Last but not least, keep away from children and pets.
Frequently Asked Questions
It is more likely that your solution is either too hot or too cold. Either way it will not show any indication.
Once activated the heat pad will barely feel warm to the touch and this is perfectly normal as the heat pad in combination with your body heat will raise the urine to its ideal temperature within one (1) hour. This is not the type of heat pad you would use in the snow, it will only feel very slightly warm to ensure your synthetic urine is not overheated.
This can be re-used multiple times. The belts life-span will depend on how well it is cared for. It should be washed thoroughly between uses, and handled with care.
1. Using the supplied syringe, measure 90cc/ml of water into a clean disposable cup. Room temperature water is recommended in order to speed-up the heating process. The syringe only holds 60cc/ml at a time, so you will need to split up the measurement.
2. Add the entire content of the vial of synthetic urine (sold separately) to the cup of water.
3. With a clean disposable instrument (plastic utensil works fine) stir the mixture together until powder is completely dissolved.
4. Using the syringe, suck up the urine mixture and inject it into the empty pee bag via the refill port.